T-Tape Merida Sport Nylon is a transfer film with a special heat sealing adhesive for hydrophobic and nylon textiles. Merida Sport Nylon gives due to the self-adhesive polyester film excellent cutting and weeding properties. The ecologically inert polyurethane film has excellent washing and cleaning properties and is preferred due to a pleasant textile touch.

T-Tape Fashion are transfer films with a fashionable design with a variety of textures for modeling and tailoring the clothes. All heat transfer films are made of environmentally friendly polyurethane film according to the stringent requirements of washing and chemical treatment of products.

Especially thin polyurethane heat transfer film for digital printing and cutting on cutting plotter. PE substrate. Is suitable for working with dark textile. Recommendations: this material is particularly relevant for dark textile. It will not shine through the color of textile. You can use this material when you need to make the logo or emblem matt!

White film for printing and cutting on cutting plotter. A special layer, perfectly smooth surface gives a possibility to transfer bright colors.

Special film (190 microns) for full-color image printing with ecosolvent and solvent inks, cutting on plotter and transfering printed image on textile. Sublistop layer prevents the migration of the dyes to the surface of the transferred material. The substrate (100 mm) allows to cut small details on the plotter. Thus, the logo or the image will save it’s original color. It is especially good for making the emblems for sport industry and applying on sublimated textile.

Special polyurethane clear film for color image printing with solvent and ecosolvent inks, cutting on plotter and transferring printed images to textile. Silicon substrate. Important to know that printing is made in the mirror reflection and when you transfer the image to textile, it will be between BETWEEN film and textile. That increases the safety of image.

Clear polyurethane heat transfer film with PE substrate for digital printing. Special layer for printing and perfect smooth surface will allow to transfer bright and saturated colors.

Textile with satin surface with a layer of activated thermal adhesive layer, 200 microns. Suitable for printing on light and dark textiles. Especially suitable for printing on labor and sportswear, which should be washed at 90°C. Thanks to a smooth satin gloss finish, the colors are perfectly bright. Can be cut with scissors or a laser engraver. Silicone paper substrate.

Polyester flock for sublimation transfer from a white matt surface and activated thermo adhesive layer. Excellent color rendering and bright colors. Especially suitable for logos printing on sportswear. Can be cut on plotter using the appropriate plotter blades. Silicone paper substrate. Used in combination with RePRINT TEX paper.

UZLEX new PU formula for 3D label production extends the operating range of temperatures, which makes it easier to work at lower temperatures. Recent developments have allowed to reduce the influence of moisture on the formation of bubbles. Now it is possible to work without bubbles almost at all standard conditions. Resins are usually mixed in Vacuum Mixer in proportion 1:1 and are sold in 1kg bottles.